Thread pitch on FJ80 TRE's?

[georgey]

Hey
After the thread pitch and diameter of an FJ80 tie rod end so i can find the right heim joint to replace them with.

Thanks

[georgey]

shouldve said im after the pitch and diameter for the shank with the jam nut on it.
cheers

[evanstaniland]

its something gay like 23mm fine

[sloshy]

Good luck, I couldn't get one when I was chasing some a few years back, but that was just me.

[80's_delirious]

you wont find Heim joints to match the original thread. it is 23mm fine (1.25pitch I think) it is not at all commonly used, ie very specific to Toyota.

heim joints and johnny joints etc are mostly going to be imperial threads
just have a new heavy duty 4130 chromo tierod made to suit whatever heims you are going to use. i had one made for my 80series, cost me $80 for the 32mm 4130 steel and machining to suit 3/4heims.

[georgey]

you wont find Heim joints to match the original thread. it is 23mm fine (1.25pitch I think) it is not at all commonly used, ie very specific to Toyota.

heim joints and johnny joints etc are mostly going to be imperial threads
just have a new heavy duty 4130 chromo tierod made to suit whatever heims you are going to use. i had one made for my 80series, cost me $80 for the 32mm 4130 steel and machining to suit 3/4heims.

awesome thanks mate

[91Mav]

They're 23mm with 1.5mm pitch. LRO have them for $50... http://www.lowrangeoffroad.com/index.ph ... 3-1-5.html" onclick="window.open(this.href);return false;

[georgey]

ive already got the rod threaded for fj80 tie rods i wanted to find out what the thread count was so i could find the correctly threaded heim joint to replace the tie rod with.