Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
swivel houseing
Moderator: Micka
swivel houseing
Just wondering what people are useing in there swivel houseing oil or grease what is better ive got a 1988 range rover and they are prone to leaking from the swivel houseing even with new seals im runnning moreys oil at the moment but am thinking of makeing the change to grease thanks for any info regarding this topic
Re: swivel houseing
i run a mix of oil and grease, so the consistency is between the two.
1986 - Stage 1 V8 serIII style side ute - gone
1997 - 300 TDI 130 single cab ute - gone
1986 - 90 defender soft top, bars, buttons and tyres
2000 - TD5 disco 'the boss's rig'
1997 - 300 TDI 130 single cab ute - gone
1986 - 90 defender soft top, bars, buttons and tyres
2000 - TD5 disco 'the boss's rig'
Re: swivel houseing
I am in the middle of rebuilding mine.. Quick question, i believe once its all together you should need about 12kg pressure to move the swivel housing back and forth. is this correct.. Also with the new swivel hub bearings i need shims to take up the gap. I have been told to only put these in the top only and NOT top and bottom evenly. is this correct, thanks.
Thanks to, All the sponsors who support ROCKIT 4X4 CHALLENGE.
Who is online
Users browsing this forum: No registered users and 0 guests