Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How to tell if i have a gear or chain driven transfer

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 102
Joined: Wed Feb 16, 2011 11:08 am

How to tell if i have a gear or chain driven transfer

Post by 4_low »

I am currently wanting to fit a set of reduction gears to my YN67 Hilux how ever i dont know if i have a gear driven or chain driven transfer case. My biggest problem is its a south african import and its a mix of different hilux pieces. Is there anyway to tell what transfer i have without having to pull it apart? I can post a pic of the transfer if needed.

Thanks Dave
Posts: 86
Joined: Fri Sep 02, 2005 4:48 pm

Re: How to tell if i have a gear or chain driven transfer

Post by 904Runa »

Rearmost cover of the transfer (where the output flange bolts to) will be circle - shaped for chain drive and oval shaped for gear drive.

This will explain it

http://www.marlincrawler.com/tech/trans ... case-bible

Although I'm pretty sure yours will be a gear drive which for the purpose of reduction gears is good.
Posts: 613
Joined: Tue Sep 06, 2005 3:17 pm
Location: Newcastle/Bathurst, NSW

Re: How to tell if i have a gear or chain driven transfer

Post by UhhOhh »

The chain drive has a female coupler for an input and the gear drive has a male splined shaft.
What do we want? TIME TRAVEL! When do we want it? THAT'S IRRELEVANT!
Posts: 102
Joined: Wed Feb 16, 2011 11:08 am

Re: How to tell if i have a gear or chain driven transfer

Post by 4_low »

Thanks for the answers. Is there anyway to tell if its a 21 or 23 spline short of pulling out the case?
Posts: 245
Joined: Tue Mar 17, 2009 9:23 pm
Location: Sydney

Re: How to tell if i have a gear or chain driven transfer

Post by 4RUNNER_01 »

Its a 21 spline
BOBBED 84' 4Runner 2.8L Chugger
35's, Locker's, High steer, RUF, 4 link rear, Crawler Gears.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests