Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
diff gears
Moderators: toaddog, Elmo, DUDELUX
diff gears
hey guys new to the forum just have a few questions. ive bought a 60 series front diff to go into my 75 series ute once i do a spring over and i wanted to know how to find out what size diff gears it has in it so i can match it to the rear of my 75 diff which i also need to find out. any help would be great cheers chachi
Re: diff gears
Count the gears on the crown wheel and divid the pinion into the crown wheel for ratio...
Eg 39 teeth on a crown wheel and 9 on a pinion is
39 / 9 = 4.3333... ratio is 4.3...
If its still in the car jack it up and turn the wheel a full rotation and see how many times the tailshaft turns you can work it out pritty close like that too.
Eg 39 teeth on a crown wheel and 9 on a pinion is
39 / 9 = 4.3333... ratio is 4.3...
If its still in the car jack it up and turn the wheel a full rotation and see how many times the tailshaft turns you can work it out pritty close like that too.
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Re: diff gears
Wow thats simple haha thanks alot mate
Re: diff gears
Providing its a standard diff center it should be a 4.1:1 and should be the same as the rear of your 75. As far as I know all 75/60/40 series were the same ratio apart from the really old 40's which were 3.7:1 I think.
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295
bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Re: diff gears
ok thanks mate im gunna pull them both out and check anyway. dont wanna have everything binding on me
cheers for the help fellas
cheers for the help fellas
Re: diff gears
If you are going to pull the gears, once the centre is out, rotate the crownwheel look carefully and on the outer edge the ratio will be stamped...
Show me the money..SHOW ME THE MONEY
Re: diff gears
Only if there still factory gears... havent seen an after market set with them stamped into it for a long time...RED60 wrote:If you are going to pull the gears, once the centre is out, rotate the crownwheel look carefully and on the outer edge the ratio will be stamped...
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Re: diff gears
My Nitro's and Yukon are all stamped.macarthur 4x4 wrote:Only if there still factory gears... havent seen an after market set with them stamped into it for a long time...
Re: diff gears
OK my nitro's were never stamped...91Mav wrote:My Nitro's and Yukon are all stamped.macarthur 4x4 wrote:Only if there still factory gears... havent seen an after market set with them stamped into it for a long time...
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Who is online
Users browsing this forum: No registered users and 21 guests