I have got 40 inch treps to go on some 17 x8 wheels with only -25 mm offset .
Have not put the tyres on the rims yet but if anyone has seen or had 40s on a GU ute than what is the offset that will clear the front arms. Im guessing i will use 6mm spacer and may work. I dont care about the guards,just clearance on turning with the control arms.
And on the rear with the full up travel that hits the chassis and original tray mounts .also guessing 1.5 inch spacers added. maybe 2 inch (i dont own any so want to get it right b4 buying)
4.5 in suspension lift and 2 in body.
And yes im lazy and dont want to put these heavy tyres on and off while trying different combos to get the correct spacers. got a sore back just thinking about it.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU ute with 40s > how much offset
GU ute with 40s > how much offset
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
www.rdgengineering.com
ADRENALIN TRANSPORT
Who is online
Users browsing this forum: No registered users and 1 guest