This may be a random idea but is it possible to manufacture a roll bar/cage out of stainless steel tube? Is it practical in terms of structural strength and to work with?
The reason I ask is I see alot of polished stainless used in the marine industry and though of its application to my needs. Also the polished finish would look a treat. I can see it being more $ but that is all part of this planning.
If it is a possibility, can anyone suggest who can do such work?
Many thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Stainless Steel Roll Bar
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: Stainless Steel Roll Bar
yes you can, would I - no.
Its prone to flex cracking, way harder to bend and needs special dies with longer rads, and to have a great polish that lasts would need to be 316 which is dearer, harder etc. If its just for looks run a 316 bar made from mandrel bends. Midway metals would be the place to buy them. $17 each plus you will need to buy a full 6m length of the steel required.
cheers bru
Its prone to flex cracking, way harder to bend and needs special dies with longer rads, and to have a great polish that lasts would need to be 316 which is dearer, harder etc. If its just for looks run a 316 bar made from mandrel bends. Midway metals would be the place to buy them. $17 each plus you will need to buy a full 6m length of the steel required.
cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Re: Stainless Steel Roll Bar
If you want it for rollover protection, the best you could probably do would be to polish it all then clearcoat it...
ferog wrote:I've had worse smelling fingers though.
Who is online
Users browsing this forum: No registered users and 3 guests