What are peoples thoughts on running 2 different tread patterns.
As I have 3 Wrangler MTR's of the old tread pattern, so anything new is going to be a different pattern. So I am thinking about just getting 2 more Coopers.
On the other hand if someone has 2 Wrangler MTR's they want to let go, let me know.
I have a part time kit in the 100s so wind up will only be an issue if on a high traction surface and 4wd is engaged.
Just looking for other peoples thoughts.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
running 2 different tread patterns
Moderators: toaddog, TWISTY, V8Patrol, Moderators
running 2 different tread patterns
05 Manual HDJ100R
84 HJ60 w/12HT, twin locked with longfields
84 HJ60 w/12HT, twin locked with longfields
Re: running 2 different tread patterns
Can't see a problem if you have the part time kit. Check the tyre manufacturers website's re actual rolling diameters as well.
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Re: running 2 different tread patterns
I'm running MTZ's rear and ATZ's front and can't say as I've noticed any problems. As long as they're same size/profile it shouldn't matter
Coops
80 Series Pov Pack with 1HD-FT, 3" exhaust, King Springs 2" lift & Raw Nitro Max shocks, 2" body lift, LR Tank, F&R Lockers, Dual Wheel Carrier, 33" MTZ's
80 Series Pov Pack with 1HD-FT, 3" exhaust, King Springs 2" lift & Raw Nitro Max shocks, 2" body lift, LR Tank, F&R Lockers, Dual Wheel Carrier, 33" MTZ's
Re: running 2 different tread patterns
Can cause issues on smaller vehicles with diagonal braking circuits, or high performance vehicles...
A 4x4 shouldn't "handle" anyway, so its irrelevant. Wind up is an issue on any 'high traction' surface with a transfer case engaged - as soon as you turn a corner...
Hell, I've Seen 32" rears and 31" fronts done - the only issue was the 0.5" drop in ride height
A 4x4 shouldn't "handle" anyway, so its irrelevant. Wind up is an issue on any 'high traction' surface with a transfer case engaged - as soon as you turn a corner...
Hell, I've Seen 32" rears and 31" fronts done - the only issue was the 0.5" drop in ride height
ferog wrote:I've had worse smelling fingers though.
Who is online
Users browsing this forum: No registered users and 0 guests