Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fixing bodgey spotlight wiring info needed

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 367
Joined: Sun Oct 04, 2009 5:50 pm
Location: Penrith, Sydney

fixing bodgey spotlight wiring info needed

Post by howsie »

So we got a gq patrol with a set of 7 inch spotties which are about half as bright as the normal highbeams. Looking at the wiring and wanting to put bigger / better spotties on the wiring needs upgrading.

What I need to know is basically the wire to the switch in dash it doesn't really matter how thin it is does it as long as earth, battery +, + feed from relay and earth on spotties are upgraded to decent sized wires to handle the spotties 100 watt output. The wires are good just way too small to supply the power needed.
93 RV, 5 in tough dog lift, dobinsons shocks and coils, PA, dual fuel, many many oil leaks and a ton of character.
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Re: fixing bodgey spotlight wiring info needed

Post by chimpboy »

Correct, the wire from the dash to the relay could be tiny and still do the job, but the wires from battery->relay->spotlights need to be decent.
This is not legal advice.
Posts: 103
Joined: Thu Nov 13, 2008 2:44 pm
Location: Brisbane

Re: fixing bodgey spotlight wiring info needed

Post by Big_DP »

howsie wrote:So we got a gq patrol with a set of 7 inch spotties which are about half as bright as the normal highbeams. Looking at the wiring and wanting to put bigger / better spotties on the wiring needs upgrading.

What I need to know is basically the wire to the switch in dash it doesn't really matter how thin it is does it as long as earth, battery +, + feed from relay and earth on spotties are upgraded to decent sized wires to handle the spotties 100 watt output. The wires are good just way too small to supply the power needed.
Correst as Chimpy said. It's a trigger wire so won't 'draw any load' as such
I'm just raising my post count


I hate emoticons :grab:
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests