As the title says what mods have people found is good to do
background:
its in a truggy running a v6comm motor with 4.3 atlas bolted to it the truck will be 1700-1800 kgs i think. Has 5.29 diffs
so your thoughts??
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
C4 what mods to do ??
Moderators: toaddog, TWISTY, V8Patrol, Moderators
C4 what mods to do ??
NEW TRUCK 47series F&R A frames air shocks V6 C4 atlas full F&R hydro 40'treps JUST GOTT TO LEARN TO DRIVE IT NOW
Re: C4 what mods to do ??
Deeper pan and decent cooler i wouldn't think the V6 will put much strain on it.
If your going to rebuild it its worth getting extra clutch in the forward pack and replace the thrust's with roller bearings-(optional) Also look at the plantery they wear on the trust side from the gears. There is a 6 gear option available. A stage 2 or 3 shift kit would also be good. I use TQF trans fluid it has more bite.
If your going to rebuild it its worth getting extra clutch in the forward pack and replace the thrust's with roller bearings-(optional) Also look at the plantery they wear on the trust side from the gears. There is a 6 gear option available. A stage 2 or 3 shift kit would also be good. I use TQF trans fluid it has more bite.
I'm not stuck I'm over here!
Watch where you driven!!!
Watch where you driven!!!
Who is online
Users browsing this forum: No registered users and 1 guest