Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series vibration

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

80 series vibration

Post by HTH »

hey ppl.

my brothers 80series has created a shutter or vibration under load.
starts at about 50kph so i'd say its in the driveline somewhere??

its booked in to go into the mechanic tomoz morning but was just wondering if anyone has had a simular or the same problem? and what did it end up being?

any help is appreciated. cheers.
95 lux, Under Construction..
60% of the time it works ALL the time
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Re: 80 series vibration

Post by TheBigBoy »

Part time? I had it when I was under load or engine braking. When coasting it was gone. Drive shaft and rear diff. But, start with unis and slip joint on rear drive shaft.
User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

Re: 80 series vibration

Post by HTH »

Constant 4wd. mechanic said could be rear uni's. hopefully thats it.
cheers mate.
95 lux, Under Construction..
60% of the time it works ALL the time
Posts: 367
Joined: Sun Oct 04, 2009 5:50 pm
Location: Penrith, Sydney

Re: 80 series vibration

Post by howsie »

When mine was constant was the slip joint on the front tailshaft
93 RV, 5 in tough dog lift, dobinsons shocks and coils, PA, dual fuel, many many oil leaks and a ton of character.
User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

Re: 80 series vibration

Post by HTH »

Thanks for your help guys. You's were spot on. Uni's seezed up and fuk'd the front drive shaft. slip joint is fukd, cant even get it apart.

new shaft is on its way. thanks for your help.
95 lux, Under Construction..
60% of the time it works ALL the time
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests