Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tigerz11 10,000lb winch, how much plasma fits?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Tigerz11 10,000lb winch, how much plasma fits?

Post by 80's_delirious »

I have a 10,000lb winch with steel cable, I am looking at changing it to Dyneema 10mm rope.
How many metres will fit on the drum?
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 156
Joined: Thu Feb 14, 2008 5:18 pm
Location: brisbane/Logan

Re: Tigerz11 10,000lb winch, how much plasma fits?

Post by biggsy »

http://www.tigerz11.com.au/10000lb.html" onclick="window.open(this.href);return false;
v8-gq
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: Tigerz11 10,000lb winch, how much plasma fits?

Post by 80's_delirious »

:? :? :?

I looked on the Tigerz site before I posted the question. they only had 3 winches listed and none were 10,000lb?

oh well, all good now
RN wrote:pussy is out, its the log for me... Thank you Jesus.
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Re: Tigerz11 10,000lb winch, how much plasma fits?

Post by DamTriton »

The 10K comes with 9mm rope not the 10mm you asked about....may make a metre or two difference if you're getting ends crimped/spliced
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne

Re: Tigerz11 10,000lb winch, how much plasma fits?

Post by GUJohnno »

Typically 30M of 9 or 10mm fits on most low mount winches
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Re: Tigerz11 10,000lb winch, how much plasma fits?

Post by MightyMouse »

And squeezing on too much isn't a good idea IMHO.... if it bunches up at an end ( which happens ) then you can snap the castings by pressure on the stays.
And of course the load rating decreases with increase in effective drum diameter which more rope will contribute to in close up winching situations.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests