Budera help

[boost=money]

Hey i have a 1985 bundera, with 2lt ect
Just wondering how do i convert to pwr steer? is it the same as solid front lux? or can i bolt pwr box off a 79 lc on?
Its coil sprung to. thanks for your help in advance

[BundyMonkey]

the later model bunderas came with power steering so id just look for all the parts off one of those inc the bracket on the motor

[boost=money]

Ok will have a look but there hard to fined.
Dose anynone know what gear box mount is the same? have tryed every where no one lists them and no wreakers in brisbane can help. r thay the same as surf, 4runner, hilux?? cheers

[Mr DJ]

I would assume the pump, etc. would be the same on a 2LT, 3L and would need the steering box as well. Pump mounting bracket from memory uses or is part of engine block mount. May need idler/adjuster bearing & mount as well.
IFS box would probably need new mounting holes with crush tubes.

What gearbox are you running ? R151 ??
Check plate on firewall for code, should be gearbox code followed by 4 digit diff code starting with G (e.g. R150F G142).

This may be your rig, first one listed is 86 ...
http://www.toyodiy.com/parts/g_G_1986_T ... -MRXQ.html" onclick="window.open(this.href);return false;

LJ70 - Diesel
RJ70 - Petrol

LJ70 Transmission mount - Toyota part # 12371-35030
From this layout, it looks like the bracket may already be there to mount pump on.
http://www.toyodiy.com/parts/p_G_1986_T ... l?hl=12371" onclick="window.open(this.href);return false;

Does this look like what you need ??
http://www.ebay.com.au/itm/Gearbox-Moun ... 1c1bd2aa17" onclick="window.open(this.href);return false;