Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Custom trailer

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 246
Joined: Tue Oct 06, 2009 4:43 pm
Location: Central Coast

Custom trailer

Post by unmass »

Hey guys a forum member I went wheeling with on here has inspired me to want to build my own custom trailer.

I currently have a gq patrol on gu diffs with 15x10 inch beadlocked rims, so my truck is quite wide so drive over axle will be required.

I am chasing some pics of custom trailers as I need more inspiration.

Cheers in advance

Regards
Mitch
"If you are gonna live life on the edge u better have some good balance"
Posts: 1105
Joined: Wed Jan 23, 2008 8:56 pm
Location: central coast down under

Re: Custom trailer

Post by stilivn »

What are you after, drop into goldies trailers at narara, some pretty impressive stuff comes out of there.
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Posts: 246
Joined: Tue Oct 06, 2009 4:43 pm
Location: Central Coast

Re: Custom trailer

Post by unmass »

After some pics. Not looking at buying one I want to build a new one to replace the one we have at the moment

regards
Mitch
"If you are gonna live life on the edge u better have some good balance"
Posts: 1105
Joined: Wed Jan 23, 2008 8:56 pm
Location: central coast down under

Re: Custom trailer

Post by stilivn »

Yeah wasn't getting at buying one off him but it will need to be approved for rego, they may be able to help out with suitable materials, chassis design etc. I'm in middle of building a trailer out of an old ute chassis and will be dropping in there next week.
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Posts: 246
Joined: Tue Oct 06, 2009 4:43 pm
Location: Central Coast

Re: Custom trailer

Post by unmass »

Yeh I know about the rego side of it we have already built one. I might go check some of theirs out.

I was more just looking for designs on over axle ramps etc

Regards
Mitch
"If you are gonna live life on the edge u better have some good balance"
Posts: 689
Joined: Sat Oct 09, 2010 5:12 pm
Location: SMUGGLING COOOOOKIES ACROSS THE MEXICAN BORDER

Re: Custom trailer

Post by CRUZAAMAD »

make sure when you build go with a centre pivot between the two axle springs and NOT seperate spring hangers.
its like a see saw........ tows the best, and evens the weight out if loaded UNEVEN!!
AUSTRALIA
WORTH LOOKING AT WORTH LOOKING AFTER
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Re: Custom trailer

Post by Willy Hilux »

You could also try have a removable guards and drive over the trailer tyres them put the guards back on. Have seen this done.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Re: Custom trailer

Post by thehanko »

Willy Hilux wrote:You could also try have a removable guards and drive over the trailer tyres them put the guards back on. Have seen this done.
Thats pretty clever.

saves making super strong guards which weigh a lot and thus reduce your capacity!
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 1124
Joined: Fri Aug 03, 2007 4:14 pm
Location: Douglas park

Re: Custom trailer

Post by joshy »

only pic i can find of mine atm

Image

2.4 wide with drive over guards. weighs in at 720kg and rated to 3.5
D22 Navara....hydro coilovers, hydro steer, 42's...
76 Landcruiser tow rig
Posts: 348
Joined: Sun Aug 23, 2009 9:55 am
Location: Brisbane

Re: Custom trailer

Post by VooDoo »

Full curtin sider, 6m long, tilts, winch, 4000kg rated now with 16" wheels and tyres (6 stud). Can live in it

Image
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Re: Custom trailer

Post by crankycruiser »

anyone know of a place in cairns that can build a decent box trailer with coils in Cairns.. need something decent to cart my uad round up the cape, and dont have the time to do it myself!
80 xtra cab
Supercharged LS1, Locked n shit

80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

Re: Custom trailer

Post by tozook »

joshy wrote:only pic i can find of mine atm

Image

2.4 wide with drive over guards. weighs in at 720kg and rated to 3.5
what did that trailer cost you josh if you don't mind me asking
Posts: 853
Joined: Fri Feb 10, 2006 6:38 pm
Location: Newcastle

Re: Custom trailer

Post by Mick. »

I build horse floats and trailers for a living and the best advice I can give you is to ring Marshall Engineering and speak to them. They sell everything you will need cheaper then anyone else in Australia and will happily give you all the advice you need including the correct offsets and speed/ weight rated tyres for the trailer.

This is there web site which also has all the prices on kits to do it yourself. Also don't forget to get the latest rules and regulations before you start and check up on them again before you get your Brown Slip as the rules are always changing.

http://www.marshall-eng.com.au/" onclick="window.open(this.href);return false;

Cheers Mick.
Micks HID Projector Retrofits
Phone 0403596123 or PM me here
All custom and DIY kits available
http://stores.ebay.com.au/Projectors-re ... 8088641161
Posts: 1124
Joined: Fri Aug 03, 2007 4:14 pm
Location: Douglas park

Re: Custom trailer

Post by joshy »

tozook wrote:
joshy wrote: 2.4 wide with drive over guards. weighs in at 720kg and rated to 3.5
what did that trailer cost you josh if you don't mind me asking

Alot less then anywhere else i could find, Talk to Brett at BKA Fabrication, they are based in campbelltown 0412073617, Highly recommend them.
D22 Navara....hydro coilovers, hydro steer, 42's...
76 Landcruiser tow rig
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Re: Custom trailer

Post by redzook »

Mick. wrote:I build horse floats and trailers for a living and the best advice I can give you is to ring Marshall Engineering and speak to them. They sell everything you will need cheaper then anyone else in Australia and will happily give you all the advice you need including the correct offsets and speed/ weight rated tyres for the trailer.

This is there web site which also has all the prices on kits to do it yourself. Also don't forget to get the latest rules and regulations before you start and check up on them again before you get your Brown Slip as the rules are always changing.

http://www.marshall-eng.com.au/" onclick="window.open(this.href);return false;

Cheers Mick.

just got my trailer kit through Bawa trailer parts off ebay
got my first trailer kit through marshall both great kits but the bawa was a little cheaper

mine weighs in at between 400-420kg rated to 2 ton and i put electric brakes on both axles its a dream to tow with super light

ill see if i can snap a picture
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 103 guests