Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Just wrote an factural esay, then it made me log in again and deleted it ...
Big story short... On to my 3rd auto helmet now and im still burning my eyeballs when I go down to 5 - 10 amps with the TIG when they all state there good for 5 amps. What helmet works with a TIG at 5 amps like its supposed to? Anything is great with a MIG but I need it for TIG...
Sweet as! I was trying to get one of them but the shop i was at talked me into the Mach 4 telling me it was better as they didn't have the Miller DE in stock. How low have you gone down to with it? I take it you have one?
Nothing to do with the question in the post.
In future if your session times out while typing a long post use the back button on the browser to go back to the text you spent ages typing. At least then you can copy paste it.
steve patrol wrote:Sweet as! I was trying to get one of them but the shop i was at talked me into the Mach 4 telling me it was better as they didn't have the Miller DE in stock. How low have you gone down to with it? I take it you have one?
My Kemppi goes down to 3 amps (the arc is bit inconsistent at 3 and it's better at 5 amps) and My Miller Digital Elite is still able to trigger. You just have to turn the sensitivity a bit higher than usual.
The pics below is fusion welding along a couple of blade edges at 5 amps. At these extremely low amperages I find my eyesight to be the limiting factor and it was a bit of guesswork to see if it was really welding both edges or not. (I missed a little bit on the right hand side)
Sorry about the pics quality, I was trying to make the smallest fusion weld I possibly could and the camera doesn't really pick it up.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
ae86levin wrote:Nothing to do with the question in the post.
In future if your session times out while typing a long post use the back button on the browser to go back to the text you spent ages typing. At least then you can copy paste it.
Yeah I tried doing that but it came up with webpage has expired so had to reload the post page. Will just copy and paste before i submit in futre.
awill4x4 wrote:
steve patrol wrote:Sweet as! I was trying to get one of them but the shop i was at talked me into the Mach 4 telling me it was better as they didn't have the Miller DE in stock. How low have you gone down to with it? I take it you have one?
My Kemppi goes down to 3 amps (the arc is bit inconsistent at 3 and it's better at 5 amps) and My Miller Digital Elite is still able to trigger. You just have to turn the sensitivity a bit higher than usual.
The pics below is fusion welding along a couple of blade edges at 5 amps. At these extremely low amperages I find my eyesight to be the limiting factor and it was a bit of guesswork to see if it was really welding both edges or not. (I missed a little bit on the right hand side)
Sorry about the pics quality, I was trying to make the smallest fusion weld I possibly could and the camera doesn't really pick it up.
Regards Andrew.
Took me a few looks to work out what they were! There is some finness in that! Yeah I reckon Ill get the Miller DE then. Cheers all for the info!
I'm impressed, but then again, I was impressed when I managed to sign my name with a #6 welding tip and silver solder while brazing 0.6mm. copper sheet
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Miller helmet will do it but I am in the middle of buying a Speedglas 9100XX which is the best for Tig as it has 2 shade variables, light shade 3 & second darkness variation 5,8,9-13. Not cheap at $500+ but I have the original Miller Elite & the Speedglas will be for Tig as I want to get back into it.
brooksy wrote:Miller helmet will do it but I am in the middle of buying a Speedglas 9100XX which is the best for Tig as it has 2 shade variables, light shade 3 & second darkness variation 5,8,9-13. Not cheap at $500+ but I have the original Miller Elite & the Speedglas will be for Tig as I want to get back into it.
brooksy
Depending on which mode you choose (4 modes available) the Miller Digital Elite will also weld through the 5-13 filter range. The Miller also has X mode which only triggers when it senses the magnetic variation when the arc it triggered, a great feature for outdoor or welding in a bright enviroment.
Horses for courses, my mate uses Speedglas and I use Miller, we've both swapped helmets for comparisons but neither of us will change our preferences.
I don't think you can go wrong with either brand, they are both quality helmets.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
ive got the speedglass adflo unit with flip up grind visor, bloody fantastic!!
just got to keep the forklift away from me as it triggers the auto lense.
only use it for tig, as too dear for general boily work, cigweld hidelrock my choice in the flip tops, just have to super glue the damn pivot pins in the lens cover!!
...
