Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series viscous center diff Qs

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

80 series viscous center diff Qs

Post by SIMMO84 »

One for the 80 series gurus. If it has a viscous center diff (full time 4wd) is there still a center diff lock in low range. There is no button for center diff lock.
Wtb, 105 series rear tyre carrier, alloys and tyres.
Top
drr
Posts: 165
Joined: Tue Aug 31, 2010 8:19 am

Re: 80 series viscous center diff Qs

Post by drr »

It will still have a centre diff lock, wouldn't be a 4wd without it. There should be a button there for it.
Top
Posts: 367
Joined: Sun Oct 04, 2009 5:50 pm
Location: Penrith, Sydney

Re: 80 series viscous center diff Qs

Post by howsie »

Certain 80's only engaged 4wd in low range newer models had the centre diff lock switch to engage h4. The wiring for the switch is in all 80 series and can be plugged in and put in any model.

At least this was my understanding after reading the manual.
93 RV, 5 in tough dog lift, dobinsons shocks and coils, PA, dual fuel, many many oil leaks and a ton of character.
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 80 series viscous center diff Qs

Post by 80's_delirious »

howsie wrote:Certain 80's only engaged 4wd in low range newer models had the centre diff lock switch to engage h4. The wiring for the switch is in all 80 series and can be plugged in and put in any model.

At least this was my understanding after reading the manual.
X2

Models with viscous coupling had no CDL switch. All engage CDL when low range is selected, all will have wiring behind the dash for a CDL switch, source a switch, pop out the blank plate on the dash, plug in switch and enjoy.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Re: 80 series viscous center diff Qs

Post by SIMMO84 »

Awesome. Thanks for the replies. Exactly what I wanted to hear.
Wtb, 105 series rear tyre carrier, alloys and tyres.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 74 guests