hey guys just wondering if anyone knows the actual procedure on how to and where to plumb in a boost controller to a 96 GQ 2.8td...
already has boost gauge on, but cant seem to make any boost over 8psi??
Have tryed with no success on increasing boost with controller. If anyone knows anything please let me know.. just want to get her to 12psi...
cheers.
standard turbo, turbo line runs from turbo around to actuator with a T piece that sends another line up to injector pump.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
boost up the 2.8..
Re: boost up the 2.8..
You need to put it in the line that goes from the turbo T-piece to the turbo wastegate actuator. IE you need to bleed off air pressure to the actuator valve so it doesnt react as quickly.dirtydemonoffroader wrote:hey guys just wondering if anyone knows the actual procedure on how to and where to plumb in a boost controller to a 96 GQ 2.8td...
already has boost gauge on, but cant seem to make any boost over 8psi??
Have tryed with no success on increasing boost with controller. If anyone knows anything please let me know.. just want to get her to 12psi...
cheers.
standard turbo, turbo line runs from turbo around to actuator with a T piece that sends another line up to injector pump.
The line going to the injector pump is for the boost compensator. This needs to measure the full boost being produced
P.S The stock turbo is only good for around 14 -15psi with the wastegate disconnected.
Re: boost up the 2.8..
thanks for that mate. cheers
Who is online
Users browsing this forum: No registered users and 1 guest