Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 Series Torque Specs?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 7
Joined: Fri Jan 08, 2010 9:43 am
Location: Melbourne, VIC

80 Series Torque Specs?

Post by The Game »

Can anyone provide me with a list of torque specs for the 80 series suspension?

I just put a 5" lift in, but I don't have the owners manual to get the specs.

Cheers
Top
Posts: 367
Joined: Sun Oct 04, 2009 5:50 pm
Location: Penrith, Sydney

Re: 80 Series Torque Specs?

Post by howsie »

Will provide when I get home unless someone beats me to it
Top
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Re: 80 Series Torque Specs?

Post by TheBigBoy »

There are torque specs for suspension???
Top
Posts: 7
Joined: Fri Jan 08, 2010 9:43 am
Location: Melbourne, VIC

Re: 80 Series Torque Specs?

Post by The Game »

TheBigBoy wrote:There are torque specs for suspension???
Yeah I'm assuming I'll need them for the new radius arms, front and rear panhard rods, rear upper and lower control arms.
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 80 Series Torque Specs?

Post by 80's_delirious »

TheBigBoy wrote:There are torque specs for suspension???
x2 :lol:

I tighten them as tight as I can with an 18 inch breaker bar
Top
Posts: 367
Joined: Sun Oct 04, 2009 5:50 pm
Location: Penrith, Sydney

Re: 80 Series Torque Specs?

Post by howsie »

Shocks
Front upper and lower nut 69nm / 51ft-lbs
Rear upper nut 69 mm, bracket bolts 50 nm / 37ft-lbs, lower bolt 64nm / 47ft lbs

Stabiliser bar
To end link bolt and link to axle housing 25nm / 19ft lbs
Bush bracket bolts 18 nm / 13 ft lbs

Track bar
Bar to frame bracket nut / bolt 177 nm / 130 ft lbs
Bar to axle bracket nut / bolt 245 nm / 181 ft lbs

Tierod
Adjustment sleeve clamp bolt and end ball stud nut 44 nm / 33 ft lbs.

Steering damper nuts
74 nm / 54 ft lbs
Top
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Re: 80 Series Torque Specs?

Post by TheBigBoy »

Now ive heard everything. Even suspension shops dont use them. Rattle gun and breaker bar job :).
Top
Posts: 7
Joined: Fri Jan 08, 2010 9:43 am
Location: Melbourne, VIC

Re: 80 Series Torque Specs?

Post by The Game »

howsie wrote:Shocks
Front upper and lower nut 69nm / 51ft-lbs
Rear upper nut 69 mm, bracket bolts 50 nm / 37ft-lbs, lower bolt 64nm / 47ft lbs

Stabiliser bar
To end link bolt and link to axle housing 25nm / 19ft lbs
Bush bracket bolts 18 nm / 13 ft lbs

Track bar
Bar to frame bracket nut / bolt 177 nm / 130 ft lbs
Bar to axle bracket nut / bolt 245 nm / 181 ft lbs

Tierod
Adjustment sleeve clamp bolt and end ball stud nut 44 nm / 33 ft lbs.

Steering damper nuts
74 nm / 54 ft lbs

Legend!!! Cheers for that!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests