Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tandem trailer specs in vic

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 14
Joined: Sun May 02, 2010 12:23 pm
Location: victoria

tandem trailer specs in vic

Post by brads60 »

i want to build a tandem trailer to transport my forby around
i would like to know the largest width and length i can leagly
build it in victoria
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Re: tandem trailer specs in vic

Post by ToNkA »

http://www.infrastructure.gov.au/roads/ ... _01_b.aspx" onclick="window.open(this.href);return false;
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Re: tandem trailer specs in vic

Post by ajsr »

under 2.5 wide
under 12m long
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Re: tandem trailer specs in vic

Post by mkpatrol »

Read Tonka's post, it is the main guide all the states use. Just remeber the rear overhang, no more than 3.7m or greater than the length of the front section of the trailer. Also dont skimp on the safey chains, use the rated one as listed in the bulletin. The bulletin also explains the load sharing setup of the trailers. It is pretty informative.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests