Gday guys
Ive got a 75series that i recently converted to 12ht, it is causing me some greif with popping out of 4wd.
I have replaced
both engine mounts
gearbox mount
washered the detent spring on the side of the transfer for extra tension.
so if it is in 4wd hi and i hit a bump it will pop into 2wd hi and if i am in 4wd low it will bump into 2wd lo
Any advice is greatly appreciated, before i swap transfers :( also can the transfer be unbolted while mounted in the vehicle or is it gearbox/transfer out jobby?
cheers lads!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
75 series transfer woes
Moderators: toaddog, Elmo, DUDELUX
Re: 75 series transfer woes
I'm not too sure what's causing your problem but yes, the transfer can be replaced while the gearbox is still in the vehicle.
Re: 75 series transfer woes
the selector could be hitting the body and poping it out thats what mine was doing make sure all body mounts at tight
hj75 2h turbo intercooled twin locked longfields 35s
Who is online
Users browsing this forum: No registered users and 1 guest