45 series Question

Post by **tasman** » Fri Nov 11, 2011 4:30 pm

just a quick question i've got some rust in the foot wells of the troopy. have been looking at replacing them.

whats the best way to do this

-does someone make replacements
-have thought about cutting it out of another bus but have been unsuccesful so far
-replace it with new sheet metal.

also it looks like there is some sort of black tar like shizer on it and under that it looks like a fiberglass looking compound.

any help would be good thanks as i'm pretty new to the 45 gear. but lovein it

Post by **SCANAS** » Fri Nov 11, 2011 4:41 pm

1.Yes they make panels in the states still. Cost is

2. Yeah lots of work for the same problem. Wasting your time.

3. Yep new sheet metal is the best! Clean it all up and start fresh

The black stuff is probably sound deadner or rust proofing. Don't worry about it just clean it off with a wire brush or angle grinder attachment. Clean up the area put in your new peice, paint and re apply some sound deadner or rust proofing over it.

Calling DRS king of delegation for workers to build new 40 floors....

Post by **TWISTY** » Fri Nov 11, 2011 6:51 pm

There is a mob on the sunshine coast who I believe are about to start producing a lot of rust replacement panels for 40s. I think they have some on ebay already maybe. Bundymonkey has spoke with them so I will hit him up for there contact details and post up.

Post by **Ricko** » Sat Nov 12, 2011 9:00 am

These guys Twisty? http://stores.ebay.com.au/Aussie-Restos ... 34.c0.m322" onclick="window.open(this.href);return false;

Post by **TWISTY** » Sat Nov 12, 2011 9:17 am

Ricko wrote:These guys Twisty? http://stores.ebay.com.au/Aussie-Restos ... 34.c0.m322" onclick="window.open(this.href);return false;

Yep, that looks like them Ricko!

Post by **hj 45** » Sat Nov 12, 2011 11:20 am

That's handy, they need 40 floorpans though.

Post by **Ricko** » Sat Nov 12, 2011 1:24 pm

hj 45 wrote:That's handy, they need 40 floorpans though.

Maybe they have them, it's just their ebay store. Give em a ring.

Post by **tasman** » Sun Nov 13, 2011 4:03 pm

thanks guys. will look into it

Post by **tasman** » Mon Nov 14, 2011 11:00 am

also the best place to buy new window seals/rubbers. thanks

Post by **SCANAS** » Mon Nov 14, 2011 11:20 am

Forum member and a mate's father

The Rubber Shop

(07) 3354 2053

Sunshine Coast, QLD

if number not working PM me they have moved shop. Old number should still work though.

Post by **BundyMonkey** » Mon Nov 14, 2011 3:27 pm

Yes this is the web page http://www.aussierestos.com.au/index.ph ... &Itemid=54 for them and last i spoke with them they are hoping to have the floor pans before Christmas.

Post by **SCANAS** » Mon Nov 14, 2011 3:34 pm

The Stout in the Aussie Restos page was found and owned by a member here before it was sold to his mate at the coast where they did the body on it.

Outer Limits 4x4 Board

45 series Question

45 series Question

Re: 45 series Question

Re: 45 series Question

Re: 45 series Question

Re: 45 series Question

Re: 45 series Question

Re: 45 series Question

Re: 45 series Question

Re: 45 series Question

Re: 45 series Question

Re: 45 series Question

Re: 45 series Question

Who is online