Hi
Can some one tell me when linking ya front and back do the lower arms have
to be the same lenght?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4 link Suspension
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: 4 link Suspension
the front lowers have to be the same
the rear lowers have to be the same
the rear lowers have to be the same
I am Tim
Re: 4 link Suspension
tuff_48 wrote:Hi
Can some one tell me when linking ya front and back do the lower arms have
to be the same lenght?
Thats kind of a scary question.
Yes the arm "pairs" need to be the same length if you want something approaching predictable handling .. and if you want the system to hold together, the torsional forces you will generate on your mounts will be massive.
The whole system also needs to be squared as well.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Re: 4 link Suspension
they dont have to be the same from front to back
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Who is online
Users browsing this forum: No registered users and 2 guests