Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 Series wiper arm
Moderators: toaddog, Elmo, DUDELUX
60 Series wiper arm
My 60's wipers stopped working the other day, cause the bar, going from the motor to the blade arms came off. It's in a PITA of a spot to get at but I managed to push it back on but it just falls off again as soon as I use them. Does the plastic housing in them wear out enough to not hold it together?? There's nothing there visably broken, except a rubber boot type thing that seems to be just there to hold in grease?? Or does the rubber boot help hold it together?
60 + Turbo, 33"s :armsup:
Re: 60 Series wiper arm
Yeah, I think they just rely on the tight fit to hold the arm in. My mates one did the same thing years ago and all he did was turn up some new plastic bushings at work. I don't think he could buy them from anywhere at the time. Maybe something off a different/newer model will work and be available.
Re: 60 Series wiper arm
Can get the new bushes off ebay.$10 each and should last another 20 or so years
Who is online
Users browsing this forum: No registered users and 75 guests