Sierra Diff short tube length?

Post by **Ben78** » Sun Nov 27, 2011 12:55 pm

Hi all, just have a quick n easy question for someone with a Sierra and a tape measure handy...

For a little project I have in mind I need to find out the length from the centreline of the propshaft to the outer flange on the short side of the diff for both the front and rear. Thanks if anyone wants to go lay under their Sierra for me!

Ben

Post by **weaves** » Mon Nov 28, 2011 3:46 pm

WT or NT diffs?

i've got a dissasembled WT diff here at work i can measure in the morning if that helps

Post by **Ben78** » Mon Nov 28, 2011 8:03 pm

Yeah we'll start off with the WT, I am looking for something around the 400-450mm mark, if it has to be the NT then that is ok too. Thanks for your help!

Ben

Post by **weaves** » Thu Dec 01, 2011 2:39 pm

ive got some bare WT diffs here at work

Rear diff, Centre (pinion) to bolt flange - 490mm
Front diff, Centre to centre of king pin - 390mm

i hope that helps

Post by **Ben78** » Thu Dec 01, 2011 7:43 pm

Yep, that is absolutely perfect!

Thanks
for that.

Ben

Post by **flyinwall** » Mon Dec 19, 2011 9:20 pm

so are you going to let us in on what this little project is????

Outer Limits 4x4 Board

Sierra Diff short tube length?

Sierra Diff short tube length?

Re: Sierra Diff short tube length?

Re: Sierra Diff short tube length?

Re: Sierra Diff short tube length?

Re: Sierra Diff short tube length?

Re: Sierra Diff short tube length?

Who is online