Ok what is the high and low range ratios for the VC transfer (borgwarner)
and compared to the standard 1.22high and 3.32 low off the LT230
Cheers
Anthony
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
VC Transfer ratios
Moderator: Micka
LT 230.....1.192 high 3.32 low
BW .........1.206 high 3.244 low
plus the other high range ratios for the LT... 1-1 1.4-1 1.6-1
dont forget to get tailshafts with LT as they are different lengths. front is shorter so depending on lift of rr you may need dc tail shaft.
pete
BW .........1.206 high 3.244 low
plus the other high range ratios for the LT... 1-1 1.4-1 1.6-1
dont forget to get tailshafts with LT as they are different lengths. front is shorter so depending on lift of rr you may need dc tail shaft.
pete
Bloody Range Rover drivers !!!
Who is online
Users browsing this forum: No registered users and 0 guests