Justing a previous post. What's involved in replacing the 3.9 V8 and planting a TDI?
Would the TDI bolt straight on to the R380?
Does Radiator need changing?
Other changes needed?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Would a TDi bolt straight in, instead of the 3.9 V8 DISCO
Moderator: Micka
G'day
nope the 300tdi won't bolt up, stud pattern is different, Also you will find the input shaft for the V8 box is a smaller diameter than the 300tdi version.
As for radiator I would recommend fitting the rad and intercooler assembly from the tdi, engine mounts are different to, you have to weld new ones on.
nope the 300tdi won't bolt up, stud pattern is different, Also you will find the input shaft for the V8 box is a smaller diameter than the 300tdi version.
As for radiator I would recommend fitting the rad and intercooler assembly from the tdi, engine mounts are different to, you have to weld new ones on.
[i]DAS[/i]
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
Who is online
Users browsing this forum: No registered users and 4 guests