Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MQ/MK locking hubs to GU/GQ
MQ/MK locking hubs to GU/GQ
Needing to know if i can put manual locking hubs from an mq/mk patrol onto a gu diff need to kno ASAP plz
Re: MQ/MK locking hubs to GU/GQ
Why would you want to....they are weaker.
I know the GQ hubs will work on an MQ/MK if you leave the snap ring off but I don't know if the opposite will work.
I know the GQ hubs will work on an MQ/MK if you leave the snap ring off but I don't know if the opposite will work.
www.rmp-o.com
Re: MQ/MK locking hubs to GU/GQ
No
Different splines
Gq can't go on mq Ian different spline and size. The hub will bolt to the housing but only without internals
Different splines
Gq can't go on mq Ian different spline and size. The hub will bolt to the housing but only without internals
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Re: MQ/MK locking hubs to GU/GQ
all good guys just wanted a quick fix to get me wheeling for a day but ended up getting gu hubs cheers guys
Re: MQ/MK locking hubs to GU/GQ
WICKED wrote:No
Different splines
Gq can't go on mq Ian different spline and size. The hub will bolt to the housing but only without internals
eh?
I am sure we are on the same page just not speaking the same language!
You take the outer GQ CV stub axle and fit it to the inner CV MQ/MK axle. You then bolt on GQ hubs and leave out the snap ring. Done deal. I got a front MQ/MK C200 sitting here with the mod done to it.
www.rmp-o.com
Road Ranger
Re: MQ/MK locking hubs to GU/GQ
Its ok, he's speaking in bengrishRMP&O wrote:WICKED wrote:No
Different splines
Gq can't go on mq Ian different spline and size. The hub will bolt to the housing but only without internals
eh?
I am sure we are on the same page just not speaking the same language!
You take the outer GQ CV stub axle and fit it to the inner CV MQ/MK axle. You then bolt on GQ hubs and leave out the snap ring. Done deal. I got a front MQ/MK C200 sitting here with the mod done to it.
If the above post did not offend you in any way please PM me so I can try harder!!
Who is online
Users browsing this forum: No registered users and 2 guests