Hi all,I have do e a seach on here and gooogle but with not much luck. I just want to ask you a question about 60 series vacuum/Mechanical transmissions. I just want to know if the vacuum part can be removed and a gear stick put in? I ask because I maybe getting a gearbox/trans from a 60 series with vacuum transmission. And mine just has a gear stick, and I was hoping to run a gear stick in the tranfer.
So any help you can offer would be a big help
Thanks
Chris
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Mechanical/vacuum operated transfer 60 series
Moderators: toaddog, Elmo, DUDELUX
Re: Mechanical/vacuum operated transfer 60 series
Can be done easily, you just need to strip the vacuum transfer and convet it to a manual shift using parts from a manual transfer case and you need to drill and tpa a M15 hole. Go to ih8mud.com and search, there is a few good threads on it, easy to do.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Who is online
Users browsing this forum: No registered users and 7 guests