Has anyone here had success removing NATS immobilisation from an ECU?
I have a Nissan ZD30 ECU which originally interfaced with the key transponder and NATS system. I have none of that and want it to run stand-alone. There is one wire on the schematics from the NATS to the ECU.
Has anyone found a way to disable the system or simply mimick the NATS signal to fool the ECU into working?
I do have similar model ECU's here from other nissan diesels without NATS, but I'm hoping not to spend nights poring over each board trying to find the differences.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
ZD30 NATS (Nissan Anti Theft System) Removal.
Who is online
Users browsing this forum: No registered users and 0 guests