Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
how do i convert air con pump continus air
Moderators: toaddog, TWISTY, V8Patrol, Moderators
how do i convert air con pump continus air
vr air cond pump to continus air. dose any1 know how to do this cheers
Re: how do i convert air con pump continus air
Have a look here, http://www.grungle.com/endlessair.html" onclick="window.open(this.href);return false; this is howI did mine, it's been going for a cople of years now
Re: how do i convert air con pump continus air
Cheers ill check it out
Re: how do i convert air con pump continus air
Hey I tryed this to the V6 Commodore AC pump on my old comp truck all I did was pull it to pieces, pack the bearing with a good grease and put it back together. then I cuts the old fittings off the hoses and put hi temp hose on them to run to the tank.
It would be Ideal to have a grease point for maintance but couldn't see a good place that it would work easy. It was has been going 3 years and sold the car so i think its still going fine
thats only my experience and 2c
It would be Ideal to have a grease point for maintance but couldn't see a good place that it would work easy. It was has been going 3 years and sold the car so i think its still going fine
thats only my experience and 2c
NEW TRUCK 47series F&R A frames air shocks V6 C4 atlas full F&R hydro 40'treps JUST GOTT TO LEARN TO DRIVE IT NOW
Re: how do i convert air con pump continus air
If your using a Sanden 508 or similar, there is a plug in the side of the casing that can be removed, drilled and tapped for a grease nipple.
Mud makes excellent toothpaste.
Re: how do i convert air con pump continus air
I'm using a sandon 508. Made some brackets and jammed it on.
Squirt some oil in it everynow and then. Been on for years.
Squirt some oil in it everynow and then. Been on for years.
Those who choose to drive in the mud do so because they can't drive the rocks.
Re: how do i convert air con pump continus air
Run the air inlet of the compressor into the top oil vent in the engine tappet cover.
Oil mist going into the compressor keeps everything happy. Job done, never worry about it again.
Other than drips of oil in ya tyres...
...which then also keeps rust at bay.
Oil mist going into the compressor keeps everything happy. Job done, never worry about it again.
Other than drips of oil in ya tyres...
...which then also keeps rust at bay.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Who is online
Users browsing this forum: No registered users and 137 guests