Hi guys, just in the middle of converting my RD28T GQ to a TD42.
I have most of the pieces but am stuck on the combination of engine mounts. I have cut the 4 bolt ones off the donor chasis and was going to weld them in place but I did read that the early td42 came with 2 bolt mounts like the rd28. I know I have to move the drivers side one forward about 30mm but my question is, which engine mounts (bracket) do I need to use to bolt on the td42 to go in the 4b?
Early tb42?
Any help would be muchly appreciated.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
RD28T to TD32 Conversion
RD28T to TD32 Conversion
97 GQ 2.8TD Lifted 2" etc etc..more to come :)
Re: RD28T to TD32 Conversion
PM sent
you dont need to change anything on your chassis.
I have the info and drawings and pics of what you need to do.
Would post it up here, but forgot my photobucket password...
you dont need to change anything on your chassis.
I have the info and drawings and pics of what you need to do.
Would post it up here, but forgot my photobucket password...
Re: RD28T to TD32 Conversion
Hey mate could you send me the info. Also have you got some info on wiring I'm doing a GU at the momentClanky wrote:PM sent
you dont need to change anything on your chassis.
I have the info and drawings and pics of what you need to do.
Would post it up here, but forgot my photobucket password...
Regards
Mitch
"If you are gonna live life on the edge u better have some good balance"
Who is online
Users browsing this forum: No registered users and 40 guests