Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Spacer plate .

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Spacer plate .

Post by Dozoor »

I found a plate inthe back of the range rover i just stripped, its like an adapter plate , only there are no counter sunk holes .
Was wondering did they use an adapter for any of the gearboxs ,
like the early autos . Is about 20mm thick.
Larry,
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

ZF Autos ran an adapter on the back of the crank. Same size as the back of the crank but adapts from 6 bolts on the crank to 4 bolts on the converter plate. Converter doesnt bolt to the flex plate on a ZF.
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

arrrr im a bone head !!!! Thanks Ruff ,

I done some research on the net , Ends up must be a marks adapter on the chev, they are two piece , top half for the motor and the bit i have left over is
a spacer for the bottom of box so i can use a cover plate ,
mmmmm zurrrrrr.

Just that it has half a cut out for the starter that through me of i think :oops:

dumbdy dowdy dumb :roll:

You know one of those left over bits , scratching head wtf , , somone playing funnys with me ,ect :?
Larry.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 9 guests