Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU utes rear diff

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

GU utes rear diff

Post by thunder »

does the ute come with a h233 or h260 rear diff please..
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Post by roly »

depends on the model

also in the past 2 years nissan seem to put any diff in the 4.2's and 3.0's as ARB have had issues quoting what part to order unless they eyeball the diff (or the owner knows one from the other)
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Post by thunder »

thanks roly. this helps as i got the locker 4 the h260
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Post by roly »

thunder wrote:thanks roly. this helps as i got the locker 4 the h260


im in the same boat

when i buy the 4.2TDi coil cab i want a h260 rear :D
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Post by thunder »

roly wrote:
thunder wrote:thanks roly. this helps as i got the locker 4 the h260


im in the same boat

when i buy the 4.2TDi coil cab i want a h260 rear :D


i think u r reading my mind......already started putting the wagon back to standard..
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Post by roly »

you are or me?

i'l collecting bits and now it has 2" lift and 285's already

panel beaters next :)
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Post by thunder »

im going to standard coils and shocks ...took off/out k mar bar,side steps.,bull bar, compresor,2nd battery ,lights, wiring etc ..looks a lot higher now!
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
JK
Posts: 3229
Joined: Tue Oct 22, 2002 9:00 am

Post by JK »

Ah... it is all starting to come clear... I was starting to worry about you Steve. ;)
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Post by thunder »

DirtPigs wrote:Ah... it is all starting to come clear... I was starting to worry about you Steve. ;)

ahhhh u thought i was given up 4wheelin..i cant,,,im addicted :D

what do u think about 4.6s or 4.8s ..running max would be 37 claws which measure less than that..
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
JK
Posts: 3229
Joined: Tue Oct 22, 2002 9:00 am

Post by JK »

What size tyre you going to be streeting?

Will you be fitting transfer gears?

Even the NA 4.2 has the torque to run a slightly taller axle ratio so the turbo would be sweet.

If you are going gears I'd consider running a 4.6s even with 37s.
Posts: 1575
Joined: Mon Oct 21, 2002 1:17 pm

Post by Singo17 »

roly wrote:
thunder wrote:thanks roly. this helps as i got the locker 4 the h260


im in the same boat

when i buy the 4.2TDi coil cab i want a h260 rear :D


Is that i for intercooled or injection, just checking I may have missed something in the nissan updates.
Official member of the Babinda Jimmy James Beam III Fan Club

Darth Bobo Honker Hunter Inc, for the up gunned Poodlefaker.

:armsup:"ARMS UP":armsup:
Posts: 250
Joined: Sat Sep 20, 2003 1:01 am
Location: sydney

Post by alki »

Singo17 wrote:
roly wrote:
thunder wrote:thanks roly. this helps as i got the locker 4 the h260


im in the same boat

when i buy the 4.2TDi coil cab i want a h260 rear :D


Is that i for intercooled or injection, just checking I may have missed something in the nissan updates.


intercoled
GU III,3.0 di
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Re: GU utes rear diff

Post by Juzza »

thunder wrote:does the ute come with a h233 or h260 rear diff please..


Coil = h233
Leaf = h260
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Post by thunder »

DirtPigs wrote:What size tyre you going to be streeting?

Will you be fitting transfer gears?

Even the NA 4.2 has the torque to run a slightly taller axle ratio so the turbo would be sweet.

If you are going gears I'd consider running a 4.6s even with 37s.


no transfer gears this time
i am thinking 4.8s
will be running 35s ..
max will be a 36.5
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Re: GU utes rear diff

Post by thunder »

Juzza wrote:
thunder wrote:does the ute come with a h233 or h260 rear diff please..


Coil = h233
Leaf = h260

that sucks ..
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Post by Juzza »

roly wrote:
thunder wrote:thanks roly. this helps as i got the locker 4 the h260


im in the same boat

when i buy the 4.2TDi coil cab i want a h260 rear :D


Why do you want the H260??
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Re: GU utes rear diff

Post by roly »

thunder wrote:
Juzza wrote:
thunder wrote:does the ute come with a h233 or h260 rear diff please..


Coil = h233
Leaf = h260

that sucks ..


steve

they are leaving the factory with both fitted at random, trust me
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Post by roly »

Juzza wrote:
roly wrote:
thunder wrote:thanks roly. this helps as i got the locker 4 the h260


im in the same boat

when i buy the 4.2TDi coil cab i want a h260 rear :D


Why do you want the H260??


my GU wagon is already twin locked with a h260 rear

if the coil cab 4.2 has a h260 i can fit my lockers straight into the new one, same boat as thunder
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Post by thunder »

thats exactly the reason....big is better,i think :D
move the lockers to the next gu
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Re: GU utes rear diff

Post by Juzza »

roly wrote:
thunder wrote:
Juzza wrote:
thunder wrote:does the ute come with a h233 or h260 rear diff please..


Coil = h233
Leaf = h260

that sucks ..


steve

they are leaving the factory with both fitted at random, trust me


See a lot of these trucks but have never seen a coil-cab with a h260.
Early 3.0 came with h260, current production have h233. Lots of little changes during production without warning. When the 3.0l first came out the ARB locker to suit h260 would not fit the versions used in 3.0l, not sure what was changed to fix this.
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Post by roly »

bigger splines

ARB made a new model to suit

my zd30 is 4 years old this week

when i bought it no one has series 2 stuff

has a series 1 bullbar and snorkle that were "adjusted" to fit
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Post by big red »

my 99 coil cab has the h233b diff and alben perrets new td6 coil cab has the h233b as well.
have heard the 3.0 wagons came out with a mix of diffs but haven't heard of any big diffs in the coil cabs...only the leaf models.
hmmm, interesting !
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Posts: 239
Joined: Sun Feb 15, 2004 5:36 am
Location: Maryland, USA

Post by XterraGuy »

I'm out of my league here, but is the GU the model currently being sold? If so, Nissan's site (http://www.nissan.com.au/patrolcab/specifications.asp) shows the leaf version having a full-floating rear, while the coil versions have semi-floating, which would be H260 and H233 respectively. If Nissan is randomly shuffling this, that would be quite unusual.
In search of an MQ (offset) H233b rear, housing only preferred, plus a complete GQ or GU front (4.6 ratio ideal) to be shipped to the US. Cheap! Email/PM if you can help.
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

why not buy your nw ute, and just swap the complete axles over from your wagon? easier than farking around removing and replacing hemispheres..
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Post by thunder »

Wendle wrote:why not buy your nw ute, and just swap the complete axles over from your wagon? easier than farking around removing and replacing hemispheres..


thinking about that...
but then i would have 4.3s front and 4.1s rear in the wagon!
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

The GU H260 isnt a full floater. Also the coil cabs dont come with the H260 either, they were randomly fitted to the 3L and the 4.5L. ;)
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

thunder wrote:
Wendle wrote:why not buy your nw ute, and just swap the complete axles over from your wagon? easier than farking around removing and replacing hemispheres..


thinking about that...
but then i would have 4.3s front and 4.1s rear in the wagon!


just use a rubber front tailshaft. :D
Posts: 239
Joined: Mon Dec 01, 2003 8:43 am
Location: Brissy southside

Post by Josh_GQ »

or 12% bigger tyres in the front
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Post by thunder »

its not a major issue if they only come with the smaller diff.ill still get a gu ute...coil
getting the lift and lockers taken out in a couple of weeks ,then ill make the wagon pretty(with black paint) ...
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 16
Joined: Mon Feb 02, 2004 3:49 pm

Re: GU utes rear diff

Post by leroy »

roly wrote:
thunder wrote:
Juzza wrote:
thunder wrote:does the ute come with a h233 or h260 rear diff please..


Coil = h233
Leaf = h260

that sucks ..


steve

they are leaving the factory with both fitted at random, trust me


What's on the diff to id what you have?
Post Reply

Who is online

Users browsing this forum: No registered users and 64 guests