Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1uzfe into solid axle hilux sump!

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 46
Joined: Mon Jun 15, 2009 10:25 pm
Location: Central Queensland

1uzfe into solid axle hilux sump!

Post by -DE_LUX- »

Hey lads, I'm about to start modifying my crown centre sump to clear the diff pumpkin on my yn67. If any of you guys have some photos or input as to what others have done it would be a great help. I've been of the thinking that a full rear bowl sump would be best as going up a dune or steep incline full noise would prevent it from running dry. Has anyone done this? If so how does it go if not using the strengthening part that bolts to the gearbox? Any info would be a great help, cheers.
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Re: 1uzfe into solid axle hilux sump!

Post by Mr DJ »

Mine is rear sump to work with beam axle .... but it's not a 1UZ.
Best idea is check out the Surf site for some sump mods needed. A rear sump & pickup may make your life a whole lot easier.
http://www.toyotasurf.asn.au/" onclick="window.open(this.href);return false;
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Posts: 738
Joined: Sun May 25, 2008 12:11 am
Location: Maitland, NSW

Re: 1uzfe into solid axle hilux sump!

Post by Jcas24 »

Toyota Celsior runs a rear sump
'91 Toyota Surf SSR Ltd. 2.4 TD Auto, Coil SAS, Duals, 4.88, Longs w/ front ARB, 35" MTRs
'97 Toyota Surf SSR-G Intercooled 3.0 TD Auto. 2" lift, Xrox bar, Waeco, Drawers, 32" BFGs
Posts: 46
Joined: Mon Jun 15, 2009 10:25 pm
Location: Central Queensland

Re: 1uzfe into solid axle hilux sump!

Post by -DE_LUX- »

Cheers for the input. I ended up doing a little cut and shut on the original sump and it looks like it would work.
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Re: 1uzfe into solid axle hilux sump!

Post by MissDrew »

Castlemaine Rod Shop make and sell rear sumps for 1uz's, only about $600 and comes with a modified pickup.
Posts: 413
Joined: Wed Dec 16, 2009 4:19 pm
Location: Redbank Plains, Near $hitswich

Re: 1uzfe into solid axle hilux sump!

Post by Zuri92 »

Incorrect. I have a celsior engine. They have a front sump, i swapped it for a rear sump off a soarer. As my high steer was not going to fit, i have also cut and reshaped the original lower steel section and pickup to allow clearance for my diff centre.
Many thanks to Buds Customs, for all their ongoing support
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Re: 1uzfe into solid axle hilux sump!

Post by evanstaniland »

I have a complete ls400 for sale if anyone needs an engine conversion
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Re: 1uzfe into solid axle hilux sump!

Post by MissDrew »

Zuri92 wrote:Incorrect. I have a celsior engine. They have a front sump, i swapped it for a rear sump off a soarer. As my high steer was not going to fit, i have also cut and reshaped the original lower steel section and pickup to allow clearance for my diff centre.
So much quicker and easier to just buy a complete new rear sump from CRS, bolt it on and job done, no further mods required. Doesnt matter what sump you have to start with either.
Posts: 46
Joined: Mon Jun 15, 2009 10:25 pm
Location: Central Queensland

Re: 1uzfe into solid axle hilux sump!

Post by -DE_LUX- »

How many litres does the crs sump hold? Is it an off the shelf unit or do they make it to your measurements?
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Re: 1uzfe into solid axle hilux sump!

Post by MissDrew »

Liters, NFI, too long since I have worked on my car, but its no less then stock sumps if anything its more.
Off the shelf.
Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests