Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

g16b welch plugs

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 19
Joined: Mon Apr 23, 2007 9:45 pm
Location: south coast

g16b welch plugs

Post by bobzuki »

hey guys had a look through my workshop manual and done a search trying to find out how much i have to pull off motor to replace a freeze plug just behind the water pump tube that hoses connect to i can see a 10mm bolt but how or does this tube come out of behind the water pump any ideas or info
Top
Posts: 112
Joined: Tue Jan 22, 2008 6:43 pm
Location: perth, Australia

Re: g16b welch plugs

Post by shandy »

think its just held in there with an 'o'ring type seal. could be wrong tho, but that i have always thought
Top
Posts: 19
Joined: Mon Apr 23, 2007 9:45 pm
Location: south coast

Re: g16b welch plugs

Post by bobzuki »

thanks shandy the leak had gotton so much worse on last drive so had to fix it was easier than thought was a 12mm bolt undo (it holds the tube still that goes to back of water pump )than just twist and the pipe comes out and was a o ring seal took all of 1/2 hour now no leaks and 10 degrees cooler.thanks again hope this is helpfull to others
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 6 guests