Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4 inch lift

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 5
Joined: Fri Dec 11, 2009 1:40 pm
Location: noosa

4 inch lift

Post by lickfold »

Hey guys, can someone with a 4 inch lift on a gq patrol help me out? im chasing a measurement from center of wheel hub to the bottom of the flare on the front wheel.

Thanks
nath
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Re: 4 inch lift

Post by Wozza244 »

Close enough to 530mm i have the dobinsons lift with caster plates. About 12months old.
Get out there!!
Posts: 5
Joined: Fri Dec 11, 2009 1:40 pm
Location: noosa

Re: 4 inch lift

Post by lickfold »

Iv got 600mm one side and 570mm the other. i think it looks too low for a four inch....
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Re: 4 inch lift

Post by Wozza244 »

You would notice that pulling one way on the road if it was the case. Measure to the chassis, not the guard, its just a variation.
Get out there!!
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests