Im looking at getting a complete second hand diff from the wreckers. Am I right in assuming I can use a front diff from any NH with the same final gear ratio? In my case its 4.875. Or do the diesel models differ somehow from the petrol?Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Pajero front diff help.
Moderator: -Scott-
Pajero front diff help.
So I buggered my front diff in my 91 NH 2.5 TDi Pajero Im looking at getting a complete second hand diff from the wreckers. Am I right in assuming I can use a front diff from any NH with the same final gear ratio? In my case its 4.875. Or do the diesel models differ somehow from the petrol?
Thanks
Im looking at getting a complete second hand diff from the wreckers. Am I right in assuming I can use a front diff from any NH with the same final gear ratio? In my case its 4.875. Or do the diesel models differ somehow from the petrol?Thanks
Re: Pajero front diff help.
There were 2 different front diff sizes (7.5" and 8") and (from memory) the 7.5" came in both high pinion and low pinion.
If you purchase all the associated mounting arms (and the front driveshaft) I believe you can bolt the 8" into the NH. Again from memory, I think the 3l V6 shorties had the 4.875 (mine has), and NA diesels have 5.29.
Our Tech Data thread should contain enough info to help you identify what to expect in any given model at a wrecker.
If you purchase all the associated mounting arms (and the front driveshaft) I believe you can bolt the 8" into the NH. Again from memory, I think the 3l V6 shorties had the 4.875 (mine has), and NA diesels have 5.29.
Our Tech Data thread should contain enough info to help you identify what to expect in any given model at a wrecker.
Who is online
Users browsing this forum: No registered users and 3 guests