Hello there , Could someone please help me with the connection from a 1979 HJ45 wiring loom in the engine bay to connect to a standard wiring on an 83 2H, it is the edic wiring , which the 75 plugs are square and the 83 2H are round, I have the complete 83 wagon with its original wiring available also. My w/shop manual is next to useless in this regard. Look forward to getting this sorted.
Cheers,
Bob
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Toyota 1979 HJ45 Standard Loom to connect an 1983 series 2H.
Moderator: -Scott-
Re: Toyota 1979 HJ45 Standard Loom to connect an 1983 series
My hj45 (conversion done by previous owner) with a 2h has a manual shut off (adapted cable) to stop engine. EDICs are a weak spot in my experience with 2h motors.
Hope this helps
Griffo
Hope this helps
Griffo
Who is online
Users browsing this forum: No registered users and 0 guests