Engineer in Sydney for a gq 5"lifted

[94lux]

Hey guys i'm looking for an engineer in Sydney to pass a gq ute with a 5" lift. Also wondering on how much people have paid for the same thing. Also how hard to get 37's engineered on it? Looking to buy one from Qld and register it in NSW. Any help greatly appreciated.

[4X4 shorty]

Look up John V at conslmotive not sure he will do 37s tho

[94lux]

Cheers for the quick reply, the main thing is the lift. Getting the tyres engineered is a bonus.

[4X4 shorty]

yeah he did my old green 45 for 35s that was 3 years ago

[94lux]

I just looked him up and he is around the corner! Any other engineers you guys know of would still be helpful to compare prices.....cheers

[Winger]

With all the law changes there have been some major changes thr RTA released a list in Feb of this year download the PDF on this link.
http://www.rta.nsw.gov.au/registration/ ... vsccs.html" onclick="window.open(this.href);return false;

Hope this helps
Cheers Mark

[94lux]

Awesome info winger! Thanks mate

[slosh]

yeah he did my old green 45 for 35s that was 3 years ago

Spoke with him a few weeks ago... 3" lift and 33's (on 80 series) seem to be his limit at the moment.... Simon F may be more helpful?

[ste]

Got my GU engineered last year of John with 35s. just as long as your headlights not higher than 120cm at the top .Also he wont pass superflex arms due to them being 2 piece was about $850.

[bimbo]

I am about to start a GQ build with Athol Mullen and he will only let me go 4inch total lift and 33inch as max tyres. Not sure on cost. He is in Cardiff (Newcastle)

HTH
James

[BUSTED100]

VCM Engineering 0403 328 574 has recently passed a few 80 series and GU's in our club 4 & 5" lifts with 35's. Big on huge sway bars and wheel track etc

[raven ute]

I am about to start a GQ build with Athol Mullen and he will only let me go 4inch total lift and 33inch as max tyres. Not sure on cost. He is in Cardiff (Newcastle)

HTH
James

im pretty sure athol isnt on the list of signatories anymore?

[BlueSuzy]

Yes he is on the registered list for the new vsccs

[BlueSuzy]

VCM Engineering 0403 328 574 has recently passed a few 80 series and GU's in our club 4 & 5" lifts with 35's. Big on huge sway bars and wheel track etc

Any more info? Tests involved etc?

[BUSTED100]

BlueSuzy, I replied to your PM

[91Mav]

Could you possibly PM me any info too?

I've got a few plans that I need to run past an engineer.

Cheers

[BUSTED100]

Could you possibly PM me any info too?

I've got a few plans that I need to run past an engineer.

Cheers

he was big on;
head light hight (not sure exact hight but to the top of the light)
wheel track width
brake proportionate (front to back)
sway test
hand brake to stop you from approax 20km/h
mud flaps to 200 0r 300mm from ground (can't remember exactly)
weigh bridge ticket

[Slunnie]

With all the law changes there have been some major changes thr RTA released a list in Feb of this year download the PDF on this link.
http://www.rta.nsw.gov.au/registration/ ... vsccs.html" onclick="window.open(this.href);return false;

Hope this helps
Cheers Mark

This doc was updated a couple of days ago.