Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
high beam switch interchange
Moderator: -Scott-
high beam switch interchange
Time to replace the high beam switch on a hzj75 series landcruiser, Is the switch from a hj60 the same and strait interchangable?
Re: high beam switch interchange
payday thursday so I will get a stearingwheel puller and do the chance, just another trip to the city if not work was worth the try to ask
Re: high beam switch interchange
Cant you try the old GQ trick of smashing each side of the wheel with the outsides of your fists banging down to loosen the taper then jolt it off..
Smitty
Smitty
innovation is better, better is faster, and fast is all that counts
Re: high beam switch interchange
Smitty's way generally worked for me. But I did need to give the steering shaft a tap with a hammer at the same time once. Just remember to leave the nut on a couple of turns.
THOUGHT FOR THE DAY....
Who is online
Users browsing this forum: No registered users and 5 guests