I brought my 86 range rover 3.5 v8 couldn't get running cause of split fuel lines. Fixed them and still won't start , I am getting fuel because sparks plugs getting wet from fuel. I've got spark, have new plugs ,leads ,dizzy cap and rotor. yet won't fire at all ????
Previous owner said was backfiring before it stopped working
Any ideas welcome
Thanks heaps
Trav
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rover won't start
Moderator: Micka
Subversive Bucolicism
Posts: 9196
Joined: Sat Mar 13, 2004 10:47 pm
Joined: Sat Mar 13, 2004 10:47 pm
Location: I think I hear a Dingo eating your Baby
Contact:
Re: Rover won't start
Check that the leads are in the correct position & timing is correct, the dissy may have been placed in wrong position, not hard to do, I have done it 
I don't know much about that engine, is the distributor electronic or does it have points ?
I don't know much about that engine, is the distributor electronic or does it have points ?
Workplace Safety :
Destroying our forests one Take 5 at a time.
Every time you do a Take 5 an Orangutan cries.
https://www.facebook.com/shadowthetravelcat" onclick="window.open(this.href);return false;
Destroying our forests one Take 5 at a time.
Every time you do a Take 5 an Orangutan cries.
https://www.facebook.com/shadowthetravelcat" onclick="window.open(this.href);return false;
Re: Rover won't start
From what I can tell with out full stripping dizzy apart it electronic. I got the manual and some diagrams are confusing. Which side is the left bank? So I can find number 1,
Cheers
Cheers
Re: Rover won't start
? I've tried using a timing light on my car and won't work but works on other cars with a dizzy. Why would this be? Could it be not enough juice from my coil pack ?
Thanks
Thanks
Re: Rover won't start
http://www.google.com.au/imgres?q=firin ... 3,s:0,i:81" onclick="window.open(this.href);return false;
I hope that link works
No 1 is nearest to the dissy...front right as you are looking at the engine. Make sure no 1 is on the compression stroke, remove the plug poke your finger in as you get near tdc...you need pressure, if not one more turn until you get pressure at TDC then set up the leads as per the link. no1 is the one the rotor arm is now pointing at.
Dave
PS charge you battery up fully first!
I hope that link works
No 1 is nearest to the dissy...front right as you are looking at the engine. Make sure no 1 is on the compression stroke, remove the plug poke your finger in as you get near tdc...you need pressure, if not one more turn until you get pressure at TDC then set up the leads as per the link. no1 is the one the rotor arm is now pointing at.
Dave
PS charge you battery up fully first!
Re: Rover won't start
Thanks heaps for ya help will give it a try and see we're I end up lol
Who is online
Users browsing this forum: No registered users and 40 guests