Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vitara from Hell
Vitara from Hell
check out this vitara that was at calrocs in the states
dont think there's much zuk left in it though
GOT WHEELBASE!
thanks to 4wdlinks for hosting em
dont think there's much zuk left in it though
GOT WHEELBASE!
thanks to 4wdlinks for hosting em
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
greg wrote:maybe he's jacked the car off it? if that toob has bent - it's obviously not very stong
Its not bent as you Gerg can appreciate ... it is "Custom Clearanced"
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
greg wrote:maybe he's jacked the car off it? if that toob has bent - it's obviously not very stong
with the weight of rockwells pulling it down id say most tube would bend
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
redzook wrote:greg wrote:maybe he's jacked the car off it? if that toob has bent - it's obviously not very stong
with the weight of rockwells pulling it down id say most tube would bend
I call 'steam pipe' on that toob then... i reckon it should have:
a) bent back into shape again
or
b) not bent at all
DMA Founding Member #1 - Now Retired
Who is online
Users browsing this forum: No registered users and 0 guests