Ive got an LN65 luxxy with holden 308 and not running A/C or A/C fans or anything (comp) so I want to rip out the centre loom which goes to the A/C control panel thing. It seems to connect to the main loom via 2 plugs. Can i just pull it off?
If anyone can point me in the direction of a wiring diagram that would be sweet too!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Culling a hilux loom
Moderator: -Scott-
Re: Culling a hilux loom
I've just been playing around with a yn65... yes all the A/C harness just plugs in, but just tuck it up out of the way cause you may still need it for the interior fan. I have the piece which would eliminate the evaporator between the fan and heater box if you require it... Unlike you I am installing A/C, so I have all the standard stuff lying around somewhere 
YN65 X-Tra cab, 33's, 3" body lift otherwise stock. (the brumby got stolen)
Who is online
Users browsing this forum: No registered users and 1 guest