Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

does a three inch lift have to be engineered in NSW?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 30
Joined: Tue May 29, 2012 9:11 pm

does a three inch lift have to be engineered in NSW?

Post by bhundi »

hey guys im looking at putting a three inch lift in my 91 qq.it has a two inch body lift allready,would i have to get this enginered?cheers
Top
Posts: 51
Joined: Wed Jun 01, 2011 2:52 pm
Location: gladstone

Re: does a three inch lift have to be engineered in NSW?

Post by bally »

in theory yes, but a LOT of people just run the risk any way
Top
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Re: does a three inch lift have to be engineered in NSW?

Post by hammey »

You're going to get stung for the body lift before the 3" lift.

smitty
innovation is better, better is faster, and fast is all that counts
Top
Posts: 30
Joined: Tue May 29, 2012 9:11 pm

Re: does a three inch lift have to be engineered in NSW?

Post by bhundi »

ah ok.thanks for that info
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Re: does a three inch lift have to be engineered in NSW?

Post by MARKx4 »

loose the body lift and keep the 3 inch lift and will be hardly noticeable and you will fit 33s with radius arm spacers with no trimming and rubbing, and 35s with a little guard trim and will be a lot better off road and a hell of a lot better on road.

Mark.
Its not cool, unless it's got boost :)
Top
Posts: 30
Joined: Tue May 29, 2012 9:11 pm

Re: does a three inch lift have to be engineered in NSW?

Post by bhundi »

cool thanks mark.im looking at maybe an efs kit or suspension stuff kit.any ideas? cheers pete
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Re: does a three inch lift have to be engineered in NSW?

Post by MARKx4 »

I ran suspension stuff and was great and they are great blokes to deal with as well.

Mark.
Its not cool, unless it's got boost :)
Top
Posts: 30
Joined: Tue May 29, 2012 9:11 pm

Re: does a three inch lift have to be engineered in NSW?

Post by bhundi »

thanks mark,seem to hear only good things about those guys.cheers pete
Top
Posts: 13
Joined: Tue Jul 10, 2012 2:43 pm

Re: does a three inch lift have to be engineered in NSW?

Post by Patrolgod »

The 3" dosent look out of place if the tyre size is also done to suit
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 140 guests