Any thoughts on this kit: http://www.rocky-road.com/samurai-coil-conversion.html" onclick="window.open(this.href);return false;
Im seriously considering it if all other options for a coil lift kit are unavailable in Aus..
Please do shed light on this.. Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rocky Road Sierra/Samurai 6" Coil Kit
Rocky Road Sierra/Samurai 6" Coil Kit
just beat a Marlin in a swimming race
Re: Rocky Road Sierra/Samurai 6" Coil Kit
That isn't a lift kit for a coil spring Sierra, it's a coil conversion kit for a leaf sprung Sierra. Two very diferent things.
What type of Sierra do you have?
The coil conversion would need engineering so I'd make sure before.
Also not sure if Glenn even makes those kits any more, his service can be a bit lacking sometimes
What type of Sierra do you have?
The coil conversion would need engineering so I'd make sure before.
Also not sure if Glenn even makes those kits any more, his service can be a bit lacking sometimes
Ransom note = demand + collage
Re: Rocky Road Sierra/Samurai 6" Coil Kit
Oh righto...i thought id suit coily aswell.. My bad. Im picking up a swb soft top coily next week and have been researching for a decent coil setup to suit 31's n give good flex... Also read something along the lines of using Jimny diffs n coils?
just beat a Marlin in a swimming race
Re: Rocky Road Sierra/Samurai 6" Coil Kit
You will find it hard to find a off the shelf set up that's good, trailing arms are a week spot with to much flex, the bend & snap...
Re: Rocky Road Sierra/Samurai 6" Coil Kit
Jimny diffs are a waste of time. They are no stronger, and employ the same binding radius arms.
Converting the front end to seperate shock and coil however is a big step forward.
Here is one I did a little while back. Has a WT front diff.
Also threw some links in, in place of the radius arms.
This is heavily bump spaced until a Virtual lift has been done. I estimate something like an additional 3" of uptravel will have been gained over stock once V/L is complete. Should scrub 31's, even with a B/L. The rear is also fully flexed due to its lower roll stiffness, so there is still another 2 or 3" of down travel to be had in the front end.
Converting the front end to seperate shock and coil however is a big step forward.
Here is one I did a little while back. Has a WT front diff.
Also threw some links in, in place of the radius arms.
This is heavily bump spaced until a Virtual lift has been done. I estimate something like an additional 3" of uptravel will have been gained over stock once V/L is complete. Should scrub 31's, even with a B/L. The rear is also fully flexed due to its lower roll stiffness, so there is still another 2 or 3" of down travel to be had in the front end.
[url]www.twinstickoffroad.com[/url]
Re: Rocky Road Sierra/Samurai 6" Coil Kit
Thanks Gutless, i need to read up on the process of doing this, are there any threads of someone completing this mod? what size coils are recommended for 31's? At the moment i'll be picking up Dobinson 50mm Coils next week..
just beat a Marlin in a swimming race
Re: Rocky Road Sierra/Samurai 6" Coil Kit
The one above uses 75mm lifted rear jimny coils in the front. It sits about 10mm lower than the 50mm lifted rear SJ80 coils in the rear.
[url]www.twinstickoffroad.com[/url]
Who is online
Users browsing this forum: No registered users and 4 guests