Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff swaps on MQ/MK SWB

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 150
Joined: Wed Mar 10, 2004 7:02 am
Location: Newcastle

Diff swaps on MQ/MK SWB

Post by CB0569 »

I am thinking about changing the diff ratio in my MK SWB petrol.What is the best way to go about it?do I
a)Just swap centres
b)Swap centres and drive shaft in diff
c)Swap complete diffs

or any other ideas will be great.
Currently have 4.625 I think diesels are 4.111
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Swap rear centre, swap whole front axle assy.

Find someone who want to swap for lower ratios.

bazzle
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

That depends what you can get your hands on?? Its a real easy job to just change the rear diff centre, not much harder to swap the ring and pinions, the front is a little harder, but still possible, If you becide to swap the centres just make sure that they match - splines, etc.
I take it you want to rev a little lower by going to 4.11s, Have you got a 4sp or 5sp, I'd put in a 5sp if i didn't already have one rather than swap diffs, there's one for sale in the for sale section i think.
Both of my cars have 4.875 diffs in them, the shorty mk has a 5sp and 31s and the mq tray has a 4sp and 35s/36s :twisted: , and they are both originally diesels.
I'm not too sure what cars had the 4.11s maybe the p40 engine :?:
There are no stupid questions, but there are a LOT of inquisitive idiots
Posts: 150
Joined: Wed Mar 10, 2004 7:02 am
Location: Newcastle

Post by CB0569 »

Unfortunatly it is only a 4 speed.I have a 5 speed here but the mods required means gearbox further back,shorter tailshafts and modify gearbox mounts.The minister for finance has really put the screws on me with money spent on it.
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

CB0569 wrote:Unfortunatly it is only a 4 speed.I have a 5 speed here but the mods required means gearbox further back,shorter tailshafts and modify gearbox mounts.The minister for finance has really put the screws on me with money spent on it.


depends on whether its diesel or petrol

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 150
Joined: Wed Mar 10, 2004 7:02 am
Location: Newcastle

Post by CB0569 »

Sorry Kingy.
Its the 2.8l petrol.
I`m the one who spoke to you about your gearbox mod. But the wife has now really put the foot down with funds.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests