Hi
I have a 1989 HJ 75 series Land Cruiser
At the moment there is a fair bit of play with the pitman arm stud on the Drag Link side when turning the steering wheel backwards and forth.
I've been told that you can adjust the slack out of the stud but from memory there is only the seats, spring and a plunger in there.
It's been a while since I had it apart and I could be totally wrong.
Any advice welcome
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
HJ 75 Pitman arm adjustment
Moderators: toaddog, Elmo, DUDELUX
Re: HJ 75 Pitman arm adjustment
Some you can, not all aftermarket, there is usually a slot for a big screw driver in the end, just wind it in or replace the joint
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Who is online
Users browsing this forum: No registered users and 0 guests