Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

front bar tube size

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

front bar tube size

Post by flyinwall »

After hitting a kangaroo the other night i have decided that i need to make myself a solid front bar and i am not sure what size tube to use
i was going to start with a piece of 4"x2" box and go from there but i am unsure what would be the best way to go so can anyone help with designs or suggestions
the vehicle in question is a 99 mitsubishi challenger
and yes i did search but not much came up for me
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Re: front bar tube size

Post by RAY185 »

Don't they have airbags?
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Re: front bar tube size

Post by flyinwall »

unfortunatly yes it does
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Posts: 837
Joined: Sat Aug 16, 2008 5:41 pm
Location: out playin

Re: front bar tube size

Post by stock 4runner »

If it has air bags you can't legally mate your own bar but it's up to you weather you do or not
Rims flipped from $50
Posts: 1315
Joined: Wed Aug 17, 2005 6:24 pm
Location: Spring Mountain, Greenbank.

Re: front bar tube size

Post by brooksy »

Depends on airbag system used.


brooksy
C44F-Custom 4x4 Fabrications
0400 443 802
brooksy72@live.com.au
Posts: 15
Joined: Sat Aug 18, 2012 7:16 pm

Re: front bar tube size

Post by DaGMan »

4wd built after 2007 - Regulations 2004 states that it is a requirement that vehicles built to comply with ADR 69 - Full Frontal Impact Occupant Protection continue to do so.
Posts: 15
Joined: Sat Aug 18, 2012 7:16 pm

Re: front bar tube size

Post by DaGMan »

Summary of the australian standard for bull bars

http://www.racv.com.au/wps/wcm/connect/ ... +bull+bars" onclick="window.open(this.href);return false;
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Re: front bar tube size

Post by flyinwall »

if my understanding of this is correct i dont need to comply with any of it as my vehicle is a 99 model and this starts at 2000 models

ADR 69: full frontal impact occupant protection

Applies to :
All new model passenger cars sold from 1 July 1995 and 1 Jan 1996 for all new passenger cars.
All new off-road passenger and forward control passenger vehicles from 1 Jan 2000 (and all new models from 1 Jan 1998)
ADR 72: dynamic side impact occupant protection

Applies to :
All new passenger cars sold from 1 Jan 2004 (and all new models from 1 Jan 1999)
All off-road passenger and forward control vehicles from 1 Jan 2004(and all new models from 1 Jan 2000)
ADR 73: offset frontal impact protection

Applies to :
All new passenger cars (with a gross mass less than 2.5 tonnes) sold from 1 Jan 2004 (and all new models from 1 Jan 2000)
It does not apply to off-road passenger or forward control vehicles.

taken from here http://www.racv.com.au/wps/wcm/connect/" onclick="window.open(this.href);return false; ... +bull+bars (mind you that is victoria and im in qld)
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Re: front bar tube size

Post by flyinwall »

brooksy wrote:Depends on airbag system used.


brooksy

can you give me more details as to what i can do
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Post Reply

Who is online

Users browsing this forum: No registered users and 101 guests