comp truck trailer

[was a 75]

anyone building trailers for comp trucks in brisbane for a reasonable price? ive been to a couple of places and the general response seems to be nah mate not interested or that'll be a million bucks! i like the idea of the drive over guards like lukeys 4x4. any brisbane suggestions would be apreciated. thanx

[bede fab]

hans at yamanto ,peak engineering or if your handy do it your self

[was a 75]

hans didnt want to know about it. wishes they would take that pic off their website. pity coz it was ideal. might try peak then. thanks

[Big_GQ]

Bolsy sheet metal and fabrication.

[evanstaniland]

Bolsy does good work, he did my trailer

[bru21]

DIY mate.

Just building a tilt single axle for my little bro's drifter.
You cannot compare home built to commercial one's.

This one has cost near 3k... but has hydro disc brakes, IRS rubber axle, and all the best fittings / wheels.
I have spent 6 hours on it and its nearly half done.
Could have built it in a day if I had all the parts first.

[MikeH]

I looked around for a while, the best new trailer I found was a tilting flat deck Chinese import thing at about $8k which I was looking at putting pockets in for the front wheels to drop into to lower the COG. it had a hydraulic ram for the tilt action, the drawbar hinged down.
I ended up getting a good trailer second hand right place right time from a bloke who'd had enough and was getting out of it.

[KUSTOMV840]

what weight you looking to carry? I know of one that will carry 2.2 tonne that could be up for grabs

[Gutless]

I built this one a few years ago.

tandem axle, load share, twin elec brakes, LED's, 2.4m width, 3.6m? bed, front and rear dovetail. Towed very well. 580kg unladed.

[V.W.Dave]

HAHAHA I love the fact that you have a Zook towing it around.... The brakes on the trailer would be pulling you up.

[was a 75]

kustomv840 ive got a cruiser ute so rough guess 2 - 2.5t. not sure as i havent been game to run the 20min gauntlet down to the weighbridge to find out. what $$ are we talking? pm if you want.
thats some nice work there gutless. very neat n tidy.

[A.R.T Racing]

Hooked on Trailers, Beenleigh are reasonably priced.

[evanstaniland]

Like i mentioned above Bowlsy does great work. mine is 3.5T rated, tilting deck, 4 wheel electric brakes tows like an arrow, drive over wheel arches.
it fits my comp bundy on 40"s easy

[pigletracing]

I found BATC = Brisbane Axle & Trailer Components at Tingalpa for a very reasonable price & the job quality is exelent. They just modded my Aussie swag camper trailer to a tandom wheel with electric breaks, a 2mtr x 1.6 tray on the front for the dirt bikes & a roof top tent above that for the kids. so mum & dad area at the back & with storage & bikes at the front & kids above that.

[was a 75]

Thanks for all the suggestions. Saw Bolsy recently and like what he does. Thanks again.