hey guys,
A few mates and i are going around Australia until christmas and a little while ago we noticed the rear diff was bent. We are in darwin at the moment and we really need to fix the problem as we have sheared the first drive stud and have excessiive inside tyre wear. The car is a 75 series with 80 series diffs under it and we need to find a place were we can get hold of a second hand diff housing and weld some spring hangers on it. Also, if anyone has a shop or some fabrication equipment we can pay to use that would be awsome too
Luke
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bent diff in Darwin (need help)
Moderators: toaddog, Elmo, DUDELUX
Re: Bent diff in Darwin (need help)
http://www.darwin4x4.net" onclick="window.open(this.href);return false; is the local forum.
I'm sure you'll find something on there.
I'm sure you'll find something on there.
GU td42 ute with go fast bits and go futher bits
Re: Bent diff in Darwin (need help)
hey bud might know where there is a diff housing. i live in darwin so PM you r number and i will try ring a bloke to find out. any other diff to get you outta trouble?
93 duel cab lux. 2.8 TD twin locked. Big tyres, little lift. Wide stance. Barwork and build up under way
Who is online
Users browsing this forum: No registered users and 0 guests