Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

custom gearbox mount hj75

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 22
Joined: Fri Apr 20, 2012 8:33 pm

custom gearbox mount hj75

Post by TOJO 12-HT »

Hey im after info or idears for mounting my H55F 5speed box in Hj75?
I tryed search and also google, but to no avail. I guess its something rare lol.

Im doing coil conversion, and original crossmember gets in the way.
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: custom gearbox mount hj75

Post by hulsty »

Re-mount to the inside of the chassis rails.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Posts: 22
Joined: Fri Apr 20, 2012 8:33 pm

Re: custom gearbox mount hj75

Post by TOJO 12-HT »

hulsty wrote:Re-mount to the inside of the chassis rails.
how would u do that?
as the way i measured a 79 coil front end, the control arm mount goes right where the crossmeber goes atm
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Re: custom gearbox mount hj75

Post by dogbreath_48 »

TOJO 12-HT wrote:
hulsty wrote:Re-mount to the inside of the chassis rails.
how would u do that?
as the way i measured a 79 coil front end, the control arm mount goes right where the crossmeber goes atm
I'd imagine you'd cut the original mounts off then run horizontal crush tubes through the rails and plate on each end of the new crossmember (bolting to inside of chassis rails). Radius arms could then be welded under the chassis.

Has anybody seen this done? Pictures?
Tetanus rolling on 37's
Posts: 42
Joined: Thu Jun 25, 2009 11:29 am
Location: Moura (Rockhampton)

Re: custom gearbox mount hj75

Post by matts_gemmy »

Get hold of an early hj60 h55f cross member they are mounted inside the chassis rails so it wont affect ur coil conversion thats what my 60s got an didnt effect me doin my patrol diff coil conversion
Posts: 1442
Joined: Tue Jun 27, 2006 8:30 pm
Location: nsw

Re: custom gearbox mount hj75

Post by 75 cruser »

have a look through my build the cashie, as ive overcome this, new cross member and the mounts for the radius arms mount to this, just a pain in the ass when you want to pull the gear box out

Rob
come on move over and let the 75 through
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Re: custom gearbox mount hj75

Post by rockcrawler31 »

what are you doing on here rob? Shouldn't you be off doing something unspeakable to animals?
http://www.populationparty.org.au/
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: custom gearbox mount hj75

Post by 80's_delirious »

What are doing on here Milo? Shouldn't you and Rob be doing something unspeakable to each other?
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 22
Joined: Fri Apr 20, 2012 8:33 pm

Re: custom gearbox mount hj75

Post by TOJO 12-HT »

75 cruser wrote:have a look through my build the cashie, as ive overcome this, new cross member and the mounts for the radius arms mount to this, just a pain in the ass when you want to pull the gear box out

Rob

thats sick! :)
do u think thats engenirable in vic?
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests